Dialing with Pauses - A Solution
azrobert:
Here is the post with the offending words removed.
Test 3
I connected the Line port on my OBi110 to the Phone port on my extra OBi ATA.
I configured the ATA to point to the IP address of my OBi110's SP2.
Using the phone attached to the OBi110, I dialed the speed dial from my previous post.
The call routed out the Line port to the Phone port of the extra OBi ATA.
The call was looped back to the OBi110 and routed out SP1 with the pauses.
ianobi:
Test 3:
Technically good and very diplomatic :D
azrobert:
This is the 2nd time I was censored by the word police. Both times I was recommending hardware to improve the functionality of an OBi ATA. The 1st was a repeat of many posts on the forum recommending generic hardware as an extra phone port for an OBi. My crime was to give links where to purchase this hardware and a link explaining its setup.
The post removed from this thread didn't specify the brand of the hardware. I described the hardware by its cost and one more word. I gave the forum name that has a thread describing its setup, but not a link to that thread.
I wonder if a similar thing happened to RonR and it's the reason he quit posting here.
Do you think this post will be removed?
MurrayB:
I was under the impression that RonR got into a "disagreement" with another member who I think no longer participates.
ianobi:
The RonR situation was that he always recommended making all changes from the local web page and always disabling the OBi Portal / Expert Pages method. This went against Obihai's policy and he was made aware by them that he was not welcome here unless he changed his advice. The same argument was indeed going on between RonR and another member with initials MT, who also left the forum.
I notice in your original post in this thread that the post you referred to by myself will be three years old in a few days. I was a newbie back then - I guess I'm an oldie now :) I may know enough now to go back and answer my own question!
Navigation
[0] Message Index
[#] Next page
[*] Previous page