Disabling digit map items
azrobert:
Change ITSP Profile A General DigitMap to:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.|*123)
This is the only change needed to send *123 to Anveo.
The 202 and 508 have star code *12 defined, but it shouldn't interfere with dialing *123. The only way it will interfere is to dial *12 and pause for 2 or more seconds before dialing the 3. You can remove the *12 star code. Star codes are found here:
Star Codes -> Star Code Profile A
Find star code *12 and blank it out.
After a call is completed the OBi doesn't interfere with dialing any additional digits, so you don't need to do any configuration changes for dialing ## after you are in on an active call. The only exception to this non-interference is the Flash key. I don't know what would prevent you from dialing ## when on an active call.
Hi-Wire:
Great! I got *123 to work with your ITSP change. While what you said about *12 only being activated after waiting two seconds, that change to my settings made this change work.
I'm still not sure what's up with "##" not working while on a call. It appears as though not many people have gone through the trouble of figuring this out when using Anveo's service. I've reached out to them, and will let you know what they say.
If you come up with any other ideas, please let me know.
Thanks!
Hi-Wire:
Here's what Anveo said to me last night about the issue. Any ideas?
if you have ## enabled in the configuration of your OBI device but it does not work when you press ## on your device then it means that the device is not passing ## to anveo and traps it internally. In such case you need to investigate the issue on the device internally.
Hi-Wire:
Hey there,
"*123" works great and "##", when typed during a call, works as well.
BUT, I'm now having problems dialing "*97" as well as "*99". Any thoughts on how to fix that?
Thanks!
Hi-Wire:
Any thoughts on this anyone? Could really use some help. Thanks much!
Navigation
[0] Message Index
[#] Next page
[*] Previous page