OBi202 port forwarding options gone?

(1/1)

exploding_kittens:
I was wanting to configure port forwarding on my OBi202, but the port forwarding options referenced in other posts and the old manuals I have seem to no longer be present. Were these removed in some firmware update? If not, where are the port forwarding options in the menus?

Thanks.

OzarkEdge:
I thought port forwarding was done at the site router under special circumstances.  Can you point to those port forwarding examples you mention?

OE

restamp:
You don't say what firmware load you are on EK, but the Port Forwarding page is present on the 4581 build.  It is accessible via the built-in web interface:  Router Configuration -> Port Forwarding.  And it appears to be a very nice implementation; even allows Port Number translations.  Of course, it's only usable when the 202 is configured as a router.  I run mine in Bridge mode.

OzarkEdge:
Quote from: restamp on August 09, 2015, 01:18:54 pm

Of course, it's only usable when the 202 is configured as a router.  I run mine in Bridge mode.


Oh, of course, I completely forgot about Router Mode.

OE

exploding_kittens:
All right, thanks for your replies; mystery solved. I was looking under Router Configuration in the OBiTalk portal, but only the WAN Setting And QoS Settings options appear there. I had to go to the web interface of the device directly. I did have router mode on already.

Navigation

[0] Message Index