LocalPhone and GV setup on OBI202
music5_5:
Can the log history be access thru obitalk portal? or do I have to enable the local web interface?
music5_5:
Just checked the Local web interface it shows:
Call 1 from PH1 --> to SP2 (XXXXXXXX) call ended (404 not found)
drgeoff:
Quote from: music5_5 on August 25, 2015, 05:28:53 pm
Can the log history be access thru obitalk portal? or do I have to enable the local web interface?
The Obi's Call History cannot be accessed through the Obitalk portal.
drgeoff:
What numbers are you trying to call through LocalPhone?
Your first post shows 9 digit numbers beginning 011. Your Call History appears to show 8 digit numbers being sent to SP2.
If you are dailling an international number I think LocalPhone uses the ITU-recommended 00 prefix rather than the 011 of NANP countries.
music5_5:
Hi drgeoff,
you are correct after adding extra zero front of my number, call goes thru fine. I will test it little more with different numbers and report back.
Is there anyway to modify those rule so that when I dial the number with 011 then call goes thru SP2 (LocalPhone) because I have saved all the numbers in phone and they all start with 011 not 0011.
Thanks,
Navigation
[0] Message Index
[#] Next page
[*] Previous page