LocalPhone and GV setup on OBI202

<< < (4/4)

OzarkEdge:
Quote from: music5_5 on August 25, 2015, 09:17:33 pm

Is there anyway to modify those rule so that when I dial the number with 011 then call goes thru SP2 (LocalPhone) because I have saved all the numbers in phone and they all start with 011 not 0011.

You map the intended digits dialed in the desired voice service digit map (Mspn), and not map them in the other voice service digit map(s).  Then when you dial a 011- number, it maps and routes to the desired trunk.

If you map 011- in more than one trunk digit map, then you must either route the call manually to the desired trunk using dialing prefix **x, or order the desired trunk's outbound call route rule to the left in the outbound call route or trunk group.

The dial plan I proposed already routes 011- to LocalPhone since this trunk digit map is the only one that maps 011- numbers.  When you send 011- to the dial plan, it flows through the digit map 'mask', matching LocalPhone all the way through and out that trunk in the trunk group... the OBi way!

OE

azrobert:
You are using ianobi's suggestion, so do the following:

I believe you need to REPLACE 011 with 00

Service Providers -> ITSP Profile B -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|00xx.S3|<011:00>xx.)

Rule <011:00>xx. will do what you want

011 plus xx. is used to match the dialed number
Upon a match 011 is removed and replaced by 00

If you want to just add an extra zero:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|0011xx.S3|<0>011xx.)

The other rules will be used if you dial **2...... to force a call out SP2

music5_5:
Hey Guys,

I am still getting error 404 when making call using 01191xxxxxxxxxx format. When I checked the call logs, it shows:

Call 1          10/03/2015            10:41:49   
10:41:49           From PH1                To SP2(01191xxxxxxxxxx)
10:41:51                                   Call Ended (404 Not Found)


Call 2          10/03/2015            10:47:32   
10:47:32           From PH1                To SP2(1403xxxxxxx)
10:47:34      Ringing
10:47:43      Call Connected
10:47:57                                          Call Ended   


2nd call is local call to my other landlines which goes thru but it is going thru SP2 which is LocalPhone.

Navigation

[0] Message Index

[*] Previous page