How do I configure GetOnSIP for OBi1062

<< < (2/2)

SeanTek:
Quote from: SteveInWA on January 09, 2016, 09:07:43 pm

Sean, your "gotcha" is that settings made on the local web page interface (e.g. 192.168.x.x) are overwritten by the settings stored in the OBiTALK portal.   On the IP phone, it's amusing or annoying, depending on one's mood, to watch this happen, just as you described...it accepts your change, then the portal sees that something's different, so it pushes another change and reboots the phone.

So:  make the change in Expert Mode on your OBiTALK portal account for the 1062.  If you haven't already figured it out, you must first un-check both boxes to the right of the parameter to be changed, before you can customize it.  Click the submit button to save and push the change.

You can disable OBiTALK programming entirely, but I suggest working from the portal for now.


Got it! Looks like GetOnSIP works now! I made a successful test call.

drgeoff:
It is also somewhat annoying or amusing that each time someone makes a new post when they have fallen foul of this, immediately above in the topic list is written in bold characters Managing Your OBi Device Configuration: OBiTALK or OBi Web Page but NOT Both.

Navigation

[0] Message Index

[*] Previous page