Analog phone stops working
roborative:
My analog phone will occasionally display a message "Check Tel Line". When I see this message I cannot get a dial tone and any access to the Obi110 seems to fail from the phone. I can use my iPhone to connect to the Obi110. The only thing I've found that allows the analog phone to work again is if I unplug the Obi110 for ten seconds or so.
This issue has started occurring frequently and is tiresome so I'm hopeful that someone has a solution for it.
Thanks!
RonR:
Have you tried a different telephone connected to the OBi's PHONE Port to isolate whether it's the phone or the OBi that's the problem?
roborative:
I have not but I've unplugged the phone's power supply (it's a cordless) for a minute or so and plugged it back in and it has no effect. The only thing that makes a difference is unplugging the power supply of the Obi110. I don't have another analog phone to test with unfortunately.
RonR:
roborative,
With power removed from the OBi, the PHONE Port is connected directly to the LINE Port, totally bypassing the OBi.
You might try changing:
Physical Interfaces -> PHONE Port -> OnHookTipRingVoltage : 52
If that has no effect, I think you need to find another telephone to try. It doesn't need to be anything special.
roborative:
@RonR: I'm a little confused as I don't have a land line. Just to clarify, the analog phone works again once I plug in the OBi. It's like something has reset and there's an audible click -- it's like something has been reset.
Navigation
[0] Message Index
[#] Next page