Cannot configure Obi100 to use Google Voice
SteveInWA:
No.
It's possible that your device is already added on a different portal account. There's no way that you are going to resolve this yourself. Your options are to pay Obihai for out-of-warranty support, or just buy a new device. The OBi 20x family offer more capabilities, and have the processor power to support current and future features.
kliu888:
OK. Thanks for the help. I've already contacted the support and they told me to buy an Obi200. Well, since my device was working fine until the auto firmware update, I don't feel like paying for it. So I will just disable auto firmware update on my other device and use that one until it no longer works. Then look for alternatives from other manufactures.
Thanks again for your help.
SteveInWA:
Just one more thing for you to check: if you had previously set firewall rules on your network to block the ports used by the OBiTALK provisioning network, you would, of course, need to have removed those rules, so the device could communicate with the portal.
azrobert:
What time did you last try adding your OBi100 to the portal? The OBiTalk network has been down since Sunday. MrGadget reported OBiTalk was restored about 11:00 PST today.
http://www.obitalk.com/forum/index.php?topic=10313.msg68110#msg68110
kliu888:
Tried all throughout Monday & just did it again now. The device just reboots as soon as I dial **5 xxxx. I don't think it's trying to connect to ObiTALK network at all. Their network being down Sunday was probably the reason why the firmware update bricked my device, which is why I don't think I should be paying for it. I suspects my firmware was not fully functional but it won't let me upload another one now. When they release a new firmware I will try to upgrade and maybe that will allow me to add the device.
Navigation
[0] Message Index
[#] Next page
[*] Previous page