"Emergency Service Call Routes to:" Add the number yourself

<< < (2/2)

kccasey:
I initially logged directly into the Obi Interface through the IP address and everytime I made the change to the CallRouting, I reboot as instructed.  When everything reconnects, I dialed 911 to test, and I receive a prompt that the call could not be completed.  I relogged back into the Obi through IP address and I noticed the script that I added was removed. I updated and rebooted twice and the scripting still gets removed.

I then logged into obitalk.com and performed the change that way, and the scripts stuck this time and I tested it out and everything works as expected.

Why would I not be able to make the changes directly to the Obi Device via it's direct UI IP interface?
What did I do wrong?

This is the same scenerio applies when changing the admin password to login to the Obi.  I was obviously able to change it when accessing through obitalk web interface.

What is the issue with the Obi that you basically are required to go through the web portal to make changes to the obi device?

drgeoff:
http://www.obitalk.com/forum/index.php?topic=92.0

Navigation

[0] Message Index

[*] Previous page