identify which channel get call with distinguish ring

[kuan]

setup gv in sp1 , voip.ms in sp3, need to know which line to ring by ring pattern. in expert mode , there is ring profile A , default ring 1, both is greyout cannot be changed.  What is profile A and default ring ? it is difficult to read through the manual.It seems that basic command program language related to telecom needed.

[azrobert]

To make a change you need to uncheck BOTH boxes to the right of the value.

DefaultRing 2 is a triple ring
DefaultRing 3 is a double ring

[kuan]

thanks , azrobert, you really save my life. what is difference between ringprofile and defaultring?

[azrobert]

There are 2 Ring Profiles (A and B). They are listed under Ring Settings. Each Ring Profile contains 10 Ring Patterns. The DefaultRing points to a Ring Pattern.

Ring Pattern 1 = 60;(2+4)
60 = Ring for 60 seconds

2 = Ring for 2 seconds
+4 = Silence for 4 seconds
Repeat for a total of 60 seconds

Ring Pattern 3 = 60;(.8+.4,.8+4)
.8 = Ring for .8 seconds
+.4 = Silence for .4 seconds
.8 = Ring for .8 seconds
+4 = Silence for 4 seconds
Repeat for a total of 60 seconds

These patterns can be modified.