Must use OBiPortal to set up GV??

<< < (2/2)

azrobert:
Another option is to use Bill Simon's GV gateway.
https://simonics.com/services/

You also get CNAM with the gateway.

A free option is GVSip, but there has been a lot of problems with this service.

SteveInWA:
You're unnecessarily making things harder, for no good reason.  Just use the OBiTALK portal to set up GV on your devices.  If you have some objection to remaining on the portal, you can disable it afterwards.

Set up:  http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460

Optionally, manage locally:  http://www.obitalk.com/forum/index.php?topic=8685.0

redd:
Quote from: azrobert on September 18, 2015, 04:44:16 pm

Another option is to use Bill Simon's GV gateway.
https://simonics.com/services/

You also get CNAM with the gateway.

A free option is GVSip, but there has been a lot of problems with this service.


Thanks. I had heard / read about that but did not realize it was a way to do the complete setup, bypassing obiportal.

redd:
Quote from: SteveInWA on September 18, 2015, 05:03:44 pm

You're unnecessarily making things harder, for no good reason.  Just use the OBiTALK portal to set up GV on your devices.  If you have some objection to remaining on the portal, you can disable it afterwards.

Set up:  http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460

Optionally, manage locally:  http://www.obitalk.com/forum/index.php?topic=8685.0

Thanks, that second link answers a lot for me.

You are probably right. I just like being able to directly set up / control the device. Probably some misplaced control freak in me.

I did not realize I could disable (or cancel??) my portal account after provisioning the Obi w/GV acct. credentials. I guess I just assumed it might "un-provision" the devices associated w/the portal acct..

Thanks all for the options, info. & links. Appreciate the hand holding.

Navigation

[0] Message Index

[*] Previous page