One GV Account and a Obi100 and Obi200
sidesrob:
Thanks for the correction. My situation presently is that my Obi200 is offline (unplugged) in another city to which I won't return for a couple of months. I have my Obi100 with me and can make calls, but not receive. Can I somehow disable the Obi200 from the Obitalk web interface to restore full functionality to the Obi100?
azrobert:
If the OBi200 is powered off then it shouldn't interfere with calls to the OBi100. Can you receive calls on the OBi200 when it's powered on?
Did you make any changes to the X_InboundCallRoute on the OBi100 for GV?
If you made changes, please post the value.
You need to uncheck both boxes to the right to be able to see the current value.
Maybe you have a phone problem.
When you call the GV number, does the phone port LED flash?
SteveInWA:
Quote from: sidesrob on January 12, 2016, 09:20:40 am
Thanks for the correction. My situation presently is that my Obi200 is offline (unplugged) in another city to which I won't return for a couple of months. I have my Obi100 with me and can make calls, but not receive. Can I somehow disable the Obi200 from the Obitalk web interface to restore full functionality to the Obi100?
The most likely answer is that you didn't properly configure Google Voice on the OBi 100.
Take 10 minutes and do it over again.
sidesrob:
Quote from: SteveInWA on January 12, 2016, 05:54:40 pm
Quote from: sidesrob on January 12, 2016, 09:20:40 am
Thanks for the correction. My situation presently is that my Obi200 is offline (unplugged) in another city to which I won't return for a couple of months. I have my Obi100 with me and can make calls, but not receive. Can I somehow disable the Obi200 from the Obitalk web interface to restore full functionality to the Obi100?
The most likely answer is that you didn't properly configure Google Voice on the OBi 100.
Take 10 minutes and do it over again.
Did reconfigure, but situation persisted until I went back in to Obi100 Expert and changed the inbound call route back to default. I had tried changing it back to the default previously with no success, but I guess with all of the various changes I had made it was time for a 'reboot'. All working properly now! Thank you 'azrobert' and 'SteveInWA' for all the help!
sidesrob:
Quote from: sidesrob on January 12, 2016, 09:20:40 am
Thanks for the correction. My situation presently is that my Obi200 is offline (unplugged) in another city to which I won't return for a couple of months. I have my Obi100 with me and can make calls, but not receive. Can I somehow disable the Obi200 from the Obitalk web interface to restore full functionality to the Obi100?
Brilliant! Finally got all of this set up properly per your solution. Obi200 is back online, Obi100 is with me in separate city on separate network. Both GV numbers, one on SP1 & other on SP2, set up that way on each device, ring through to the Ob100. Now I just need to get back to the Obi200 back in the other city to confirm both lines still ring there. Thanks again for providing this solution!
Navigation
[0] Message Index
[*] Previous page