OBi200 randomly reboot problem (reason 91)
SteveInWA:
It's up to you! If you want to wait a few more days to see if you get a random reboot, great; otherwise, you can add SP2, and see what happens. You can, of course, back out the SP2 addition if it starts failing, to isolate the failure. Troubleshooting 101, essentially.
glasgow:
It's been 5 days without reboot. I just set up GV on SP2, left everything as default. Let's see what will happen. :)
glasgow:
While I am observing stability of the device, I'd like to post my next question here.
Current settings (default settings after two SPs added):
SP1 DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
SP2 DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Phone Line DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
Phone Line OutboundCallRoute:
{911:sp1},{933:sp1},{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Phone Line CallReturnDigitMaps:
{pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{sp3:(<**3>xx.)},{sp4:(<**4>xx.)},{bt:(<**8>xx.)},{bt2:(<**82>xx.)},{pp:(<**9>xx.)}
PrimaryLine:
SP1 Service
My requirements:
1. let the device select SP based on dialed number, without dialing **(1|2), but still can manually select which service to use with **(1|2)
2. call all North American numbers and international numbers through GV (SP2)
3. call 911, *97, *98, 4xxx, *225, and all toll free numbers through voip.ms (SP1)
4. if GV failed in (2), still call numbers in (2) through voip.ms (SP1)
4. better to keep OBiTalk service but not a must if it's a compromise of stability
What's the simple and good way to do this? I have my old settings, but I am afraid they were the culprit of random reboot, so I'd like to make changes from the default first.
SteveInWA:
I'll let Robert esplain how to accomplish your dialing goals, but first, I suggest that you leave it as-is with the defaults for a week to prove that it works without "randomly" rebooting.
glasgow:
Yes I will leave it as is for some days and observe if anything happens again. Thanks SteveInWA!
Navigation
[0] Message Index
[#] Next page
[*] Previous page