I need a dial plan for local #'s without having to dial the area code?

<< < (3/3)

equipped:
Yes, that is exactly what I need.  I would assume there are more OBI customers like me, that would find the dial plan handy, wonder why this info is so hard to find? Anyway thank you again so much!

Steve56:
How long does it generally take for the 7 digit call to go through? After setting my area code when initially configuring the service provider through the ObiTalk portal, there's roughly a four second delay until a ringback signal is heard.

Taoman:
DigitMapShortTimer=2 seconds

Quote from: OBiDevice Admin Guide

Value of the short inter-digit timer (in seconds) when collecting dialed digits according to the DigitMap on this phone port. This timer governs the timeout when a fixed length pattern has been matched while one or more other patterns can be potentially matched with more input digits.

I just got in the habit of ending every number I dial with a "#" so it sends the string immediately.

GusV:
hi guys,

In my case, the Obi200 is forcing me to dial 11 (area code) phone number so 011-305-552-1234.  I have a google voice number and it allows me to do 10 digit dialing (no 11).  I've read through this thread and it looks like my digitmap is close to the 10 digit dialing map identified in the thread.  The only difference is 911 and the '+'.  See below.  I guess I have 911 b/c I also have the Anveo account allowing for Emergency dialing (in the US).  Can anybody help with the digitmap below to allow me to do 10 digit dialing?

 (!911|*xx|<+>1xxxxxxxxxx|<+1>[2-9]xxxxxxxxx|<011:+>xx.|(Mipd)|[^*]@@.)

Navigation

[0] Message Index

[*] Previous page