LocalPhone and error 404 on obi202
drgeoff:
Quote from: music5_5 on October 14, 2015, 09:27:38 am
I did dial that number but it goes thru some sort of international 911 station.
Please confirm that you dialled 00 91 1625 230111 and got "some sort of international 911 station".
CLTGreg:
More like:
00 911 625 230111. Would like to know exactly this service is saying.
SteveInWA:
You have been asking the same question since August.
In this long thread, you received advice from several people:
http://www.obitalk.com/forum/index.php?topic=10247.0
I suspect that, not understanding the complex answers they gave you, you have now messed up your digit maps, which is causing this error.
Please don't start yet another thread, which doesn't benefit from understanding what was already done -- go back to that thread and work from there.
My advice would be to forget about trying to automate this, and factory-reset your OBi, start over with a clean, default configuration, and then decide which service provider to use as your default, for the outbound calls you make most often. Then, simply enter **x (x = 1 through 4) when you want to use the other service provider. This will avoid having to figure out and troubleshoot what was configured incorrectly.
SteveInWA:
Quote from: CLTGreg on October 14, 2015, 06:59:49 pm
More like:
00 911 625 230111. Would like to know exactly this service is saying.
No, he's dialing a valid international call to India, which has a country code of 91. His messed-up digit maps are causing it to be interpreted as a call to US 911 service.
music5_5:
Hi SteveInWA,
You are correct about being valid number to India. I am not sure why it is going thru US 911 service.
Regarding digitmap, I am not sure what is with my digitmap because I have reset my device and set them up as instructed:
SP1 for LocalPhone
SP4 for GV
Leaving the other lines open for future expasion. Everthing was reset to factory default before these settings.
About the digitmaps, every digitmap is set to obitalk defaults except sp4 (GV) and this is what it is set to:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1403>[2-9]xxxxxxS3|<**1>xx.S3)
I did create this thread because I did not get any response on the other one so my apologies for creating duplicate thread.
One more interesting thing i found after checking with Localphone support. If I dial the number as this: 911625230111
And the call goes thru. So I am not sure if my digitmap has anything to do with.
Navigation
[0] Message Index
[*] Previous page