Obi202 Multiple phones

<< < (3/3)

nite:
Issue#2
-I don't see the CONF button.
*Please see attachment for the two phone station units i have.
Is there something I have to configure in OBI so that the two phone jacks work together?

MurrayB:
Sorry I should have been more explanatory!

When one handset answers the phone the other handsets may display CONF on the screen probably over the center soft key below the screen, LCD display if you will, pressing that key will join the handset to the conversation with the other handset. Both handsets have the ability to operate independently such as leaving the call by hitting off for example or activating speakerphone on that handset.

This is also in the instruction manual. If you don't have one PDF versions are available by searching via your model number.

Good Luck!

drgeoff:
The CONF method does not require any configuration of your OBi but will only work for handsets on the same base station.

nite:
I think the same base station is the issue =/

What about issue #1?  If I have Dry DSL, should I still unplug the wire in the outside box?

MurrayB:
You are connected to the Internet through the DRY DSL connection to the phone company. If you disconnect, unplug, the wire from the outside box no internet connection.

Navigation

[0] Message Index

[*] Previous page