OBi202 not linking to Dashboard

<< < (3/3)

Vorg:
Took 3 tries to reset the device. After the first 2, it was still in bridge mode. So on the 3rd try I just held the reset until the power light changed. It starts blinking right away, but after about 15 seconds, it blinked faster for a couple seconds, then stopped for a moment. Then I let off the reset and the light went through some things back to normal on. Then it added correctly.

How ever, I think I goofed up. The first thing I always do when I get web access to a new device is change the password. The device was added to the dash board and on the web interface, it list "ITSP Profile A" as google voice. But on the dashboard for SP1 it kept the spinning icon for configuring device. It also lists the default password under web page password. I changed the web pass back to default and the spinning icon stopped, but now says "Service Not Configured". Likely took too long setting it back. I would like to change the password and I'm guessing I need to also change it on the dashboard to match. But what do I do to restart the auto config? or do I have to do it manually somehow now?

NVM on the update. I Just clicked the gear icon which basicly put me back at the preceeding page and I clicked save again. This time it says connected. I would still like to change the password. It needs to match on the dashboard right?

SteveInWA:
Change the password on the OBiTALK portal, and then the portal will automatically propagate that change to your device.

This is the case for any changes made:  changes made on the portal will overwrite any changes made locally on the device, unless you disable portal management of the device.

Navigation

[0] Message Index

[*] Previous page