Obi202 SP1 set up - newbie needs help

(1/1)

obcity:
Hi, I am just going through the set up process for my Obi202. I am configuring my SP1 (voip.ms). On the page the last two fields are username and password. Do I make up another username and password for this? Or are these the ones I already registered on Obitalk with?

Hovering over the ? information beside username, it just says: "Your account will be used in the Obi's authusername parameter". I don't know what this means.

Thanks.

N7AS:
You woulld enter the username and password from the SIP credentials you obtain from voip.ms.

Lavarock7:
With Voip.Ms you get an account number when you sign up similar to 123456. You would enter that as the name.

If you created subaccount like 123456_obi then that is your name.

The password is whatever you assigned to the main account or the subaccount.

I particularly use subaccounts because I want to use Zoiper to connect and have Obi's and other devices and each one is on a separate subaccount.

obcity:
I see, so it's the SIP username and password from my voip.ms account.

Thanks. That worked. Looks like I have the obi202 registered now.

Yury:
Quote from: obcity on November 01, 2015, 11:03:47 am

Hovering over the ? information beside username, it just says: "Your account will be used in the Obi's authusername parameter". I don't know what this means.
I had a similar issue.
We need to deal with three different Logins (plus a pin number) when setting  up OBihai adapter:
1) http://www.obitalk.com Login ID/Password
2) Voip provider (e.g. Voip.MS) Login ID/Password
3) OBihai box Login ID/Password

So it's relatively easy to confuse all these logins.

It's a design defect and should be fixed.
Names of these logins should be made more specific (e.g. like on my list above).

Navigation

[0] Message Index