December 16, 2017, 08:17:28 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: 2 differrent sip providers  (Read 5773 times)
lilianld
Newbie
*
Posts: 3


« on: June 19, 2011, 08:48:56 am »

Hi,

Presently I have grandstream HT503 which is registered with a SIP provider from a different country.  The problem is that I want to cancel my land line phone with BELL (Canada) and have a second SIP provider (freephoneline.com). Although it says that it can have up to 2 SIP profile I cannot make it work. Can OBI100/110 be configured to work with two separate SIP providers and one wireless phone receiver?

Your help is greatly appreciated.

Thanks
« Last Edit: June 19, 2011, 10:42:18 am by lilianld » Logged
RonR
Forum Member

Posts: 4528


« Reply #1 on: June 19, 2011, 09:16:59 am »

An OBi can definitely support two different SIP providers, one on SP1 + ITSPA and one on SP2 + ITSPB.

Don't forget to set:

Voice Services -> SP2 Service -> X_ServProvProfile : B

If a 'wireless phone receiver' is a cordless phone, the OBi works fine with those also.


SIP Provider 1:

Service Providers -> ITSP Profile A -> General -> Name : (SIP Provider 1 Name)
Service Providers -> ITSP Profile A -> SIP -> ProxyServer : (SIP Provider 1 Proxy Server Hostname)

Voice Services -> SP1 Service -> X_ServProvProfile : A
Voice Services -> SP1 Service -> AuthUserName : (SIP Provider 1 username)
Voice Services -> SP1 Service -> AuthPassword : (SIP Provider 1 password)
Voice Services -> SP1 Service -> CallerIDName : (SIP Provider 1 CallerID)

SIP Provider 2:

Service Providers -> ITSP Profile B -> General -> Name : (SIP Provider 2 Name)
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : (SIP Provider 2 Proxy Server Hostname)

Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (SIP Provider 2 username)
Voice Services -> SP2 Servier -> AuthPassword : (SIP Provider 2 password)
Voice Services -> SP2 Service -> CallerIDName : (SIP Provider 2 CallerID)

Physical Interfaces -> PHONE Port -> PrimaryLine : (SP1 Service or SP2 Service)
« Last Edit: June 19, 2011, 10:23:39 am by RonR » Logged
lilianld
Newbie
*
Posts: 3


« Reply #2 on: June 19, 2011, 10:41:43 am »

Thanks for the quick reply.
Just want to make sure I got it right before pulling the trigger on OBI100.
So I can set up obi to work with 2 different sip providers using just one phone handset plugged to phone jack of OBI. By working I mean, I can make and receive calls on both sip accounts. But how can I make the outbound calls. How can I switch between sip accounts? How can I tell I want to use sip1 or sip2.

And is it possible on OBI to forward calls from sip1 to sip2. Let say I receive calls on SIP1 and if nobody is picking up , after certain # of rings, it transfer the call to SIP2 internally?

Thanks again for the help.
I find this forum very helpful
Logged
RonR
Forum Member

Posts: 4528


« Reply #3 on: June 19, 2011, 11:04:33 am »

The OBi supports one single-line telephone.  Incoming calls from either SIP provider will ring this telephone (with call waiting if a second call comes in).

By default, outgoing calls will be made through the SIP provider selected by:

Physical Interfaces -> PHONE Port -> PrimaryLine : (SP1 Service or SP2 Service)

You can force a call through SP1 by dialing **1 + number or SP2 by dialing **2 + number.

Incoming calls can be forwarded unconditionally, on busy, or on no answer after a specified number of rings.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC