setting up obi110 to terminate my call and register it to obitalk without phone

<< < (4/4)

azrobert:
Quote

it s working fine with obion
Great!

Quote

any ideas?
If I understand correctly, the call completes but you have no audio.

Make a call.
Sign into OBi Expert
Click on Status on the left column
While the call is active, click on Call Status
It should show both legs (SP1 and Line) of the call
Do you have rx and tx packet counts for SP1?
What are the codecs for tx and rx for SP1?
Is the Local RTP Address port number one of the ports you port forwarded?

Are you using a local WiFi connection or your cell network.
If it's WiFi, try the cell network.

joe123:
hi azobert

sorry i didt take time to use your settings

so i wasnt able to use sip2sip as they are blocking pstn.

so i switched the settings to iptel and same issues it s ringing but there is no voice going thru

the codec in tx is g711 u and the port forwarded is going to obion ip ,but there is  rx codec and there is no rtp nor in rx nor in tx...

so what can be the issue?

thanks and sorry for the delay

Navigation

[0] Message Index

[*] Previous page