Anveo e911 w/Ring.To: Register Failed: No Response From Server

(1/1)

LuckyBug:
Hi. I'm using ObiTalk to configure my Obi200. Everything was fine for a while. Now I have an error: "Register Failed: No Response From Server" for the "Anveo E911 for RingTo" provider on SP1.

I clicked the gear and resubmitted, but still no luck.

I went into expert mode and looked at SP1. It shows status of "Register Failed: No Response From Server (server=67.212.84.21:5010; retrying)". PrimaryProxyServer and SecondaryProxyServer are blank.

Any ideas? Thanks in advance...

LuckyBug:
Of course it seemingly recovered on its own after 14 hours. Although it could have been my clicking the gear icon in ObiTalk and re-submitting. Status now says "Registered (server=67.212.84.21:5010; expire in 329s)" (i.e. same IP as before.)

Navigation

[0] Message Index