Obi100/FPL after first few minutes since reboot I could not get incoming calls.
Joel2000:
Merry Christmas! My obi100 was setup through obitak. It shows registered. In the first few minutes after reboot I could receive incoming calls. After that no rings just went to voice mail. I have no problem with calling out. I opened all ports FPL required in my router.
azrobert:
Sometimes these strange problems are caused by SIP ALG.
http://www.obitalk.com/forum/index.php?topic=33.0
Joel2000:
My old router does not have this functionality. But your concept is correct. It worked after I enabled the X_keepalive and related parameters. Thanks.
Mango:
Quote from: Joel2000 on December 25, 2015, 06:58:55 am
I opened all ports FPL required in my router.
I'm glad to hear your problem is solved. I suggest you disable your port forwarding and see if your service still works. Port forwarding effectively disables your firewall, and is not required with good routers. You should not forward ports unless there is no other way to make things work.
Joel2000:
Thank you Mango. I will try it later.
Navigation
[0] Message Index
[#] Next page