VoIP.ms Caller filtering

<< < (3/3)

Taoman:
Not that it really matters since it only costs fractions of a penny but you can configure your Robo call to use a toll free number also. You can just dial the number directly or since VoIP.ms peers with SIP Broker you can use them also. I use SIP Broker with this Nomorobo number:
**275*18667326184

Works well. VoIP.ms can get a little testy if a large percentage of your calls are to toll free numbers so I use SIP Broker.

Taoman:
Quote from: Lavarock7 on January 16, 2016, 12:50:47 am


It will be interesting to see if the calls stop.


It should stop many/most of them. Nomorobo can only stop valid NANP numbers that are in its database. Unfortunately, many telescammers are spoofing with non-NANP numbers/letters which Nomorobo ignores.

Luckily, the VoIP.ms CallerID Number Filtering allows you to filter all non-NANP numbers. Combine the two methods and it is an effective telemarketer block.

Navigation

[0] Message Index

[*] Previous page