CallCentric Register Failed: 403 Incorrect Authentication

<< < (2/2)

azrobert:
Yes, cut and paste Ron's DigitMap replacing your current map.

Change nnnnnnn to your account number.

rhymedog:
Darn... followed this to the best of my ability and still get the error message. I don't see this as an option but it sounds like it's the default setting anyway:

Voice Services -> SP2 Service -> MessageWaiting : (unchecked) (Default unchecked)

I will submit a support ticket now...

SteveInWA:
I don't understand why you are getting into the old "RonR" stuff.  It's irrelevant, unnecessary, and it's just going to cause confusion for an inexperienced user.  You don't need to do any of that.  Just configure Callcentric using the OBiTALK portal.

If you are getting the 403 error, then it means you are entering the wrong information for your Callcentric user ID or password.

Go to your OBiTALK web portal page.  Click on your 110 on the device list.  Look at SP1 and SP2.  Which one did you configure for Callcentric?  Assume it's SP2.  Click the trash can icon to the right, to delete the configuration and start over.

Next, click SP2.  You'll be taken to the portal page that offers various service providers.  Scroll down to the bottom of the page.  Select "OBiTALK compatible service providers."  On the next page, select Callcentric.

Enter your Callcentric user ID.  It's 177 followed by the seven digits assigned to you when you set up the account.  Enter your Callcentric SIP PASSWORD.  This is not the same as your Callcentric customer account password.  You must set up your own SIP password on Callentric's web portal, on the Extensions tab.

Regarding message waiting indicators, Google Voice does not support that feature.  Ignore the information you read about it.

rhymedog:
Ah ha! That was the bit of info I was missing, what password the form was looking for. Now it is working. Thank you!!

Navigation

[0] Message Index

[*] Previous page