Google Voice keeps cutting out .....
Cut-Throat:
I have 2 services set up on my OBi100 ... Anveo and Google Voice.... My Google Voice Number keeps cutting out for the other party. (I can hear them, but they say my voice is choppy and keeps cutting out) This never happens with Anveo.
Is this normal and should I just give up on Google Voice? Or is there something I can do?
Jackson:
Quote
Is this normal
No it's it's not, I have the same setup. Is this a new development?
Cut-Throat:
Quote from: Jackson on January 23, 2016, 04:10:48 pm
No it's it's not, I have the same setup. Is this a new development?
This is the first time I've tried Google Voice, so yes it is new in the last month. After I ditched RingTo (Or they ditched us).... I tried Google Voice, and Kept having this problem. So, I got Anveo and have been using it. But, if someone does call my Google Voice number, they may have some cutting out problems. I have to have them call me back on my Anveo Number.
zorlac:
Here's a repost from Steve, it may help you.
You can troubleshoot this by using the VoIP simulator test on this website:
http://myspeed.visualware.com/index.php
Select your location and use the G.711 codec, which is the most demanding of a quality internet connection. The test will simulate an actual end-to-end VoIP conversation, and will show you a MOS score that reflects factors such as jitter, latency and drop-outs, in addition to raw speed. This is the only valid test of an internet connection's suitability for VoIP -- sites like speedtest.net can't do this. If your score is below 4.0, you will need to beat on your internet provider to fix their crappy service. If your score is 4.0 or higher, and you continue to have problems, there is a small chance you have defective network hardware or cables, but more likely, it's PP's fault.
My GV works OK & here are my results.
mtmind8:
I have the same problem. I hear perfectly, but the other side always complain. Can anyone explain how to improve with settings? I think that if it is caused by the network, then I would have problems too. I use default settings on the obi200. May be it needs adjustment. Did anyone solve this problem? What did you do?
Navigation
[0] Message Index
[#] Next page