obi202 GV end of call detection
SteveInWA:
So: you are plugging the OBi into your home's telephone wiring, and then plugging the two cordless phone base stations into telephone wall jacks? Did you confirm that the telephone company's wires are physically removed from the terminal block entering your house? This is crucial.
If so, then you can troubleshoot which of the two cordless phone systems is defective. In theory, an OBi should be able to support up to five different telephones or cordless phone bases plugged into the wiring. Either you have a house wiring problem, or one of the two bases is out of spec or defective. Try plugging each of the bases into the OBi directly, one at a time, and see if one of them is causing the problem. If so, it belongs in the trash.
The best solution would be to buy a new DECT 6.0 cordless phone system with one base and as many handsets as you need. You'd then plug that one base into the OBi and be done with it. Panasonic makes the broadest range of models, and they have proven to be very reliable.
Navigation
[0] Message Index
[*] Previous page