December 14, 2019, 02:33:40 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Setting up 3rd VOIP provider on Obi100  (Read 3251 times)
scanchain
Newbie
*
Posts: 3


« on: June 25, 2011, 10:47:09 pm »

I hope somebody can help me with setting up the 3rd VOIP provider. This is my objective:

1) SP1 = Callcentric (for incoming only)
2) SP2 = Google Voice (for incoming and domestic outgoing)
3) CallWithUs (for international outgoing only)

1) and 2) are working correctly. But I am unable to get 3) to work. I found some instructions on

http://www.obitalk.com/forum/index.php?topic=526.0

but it is not clear to me what should I set for VoiceGateway 3.

Name : CallWithUs
AccessNumber : [what should I put here? VG3(sip.callwithus.com)?]
DigitMap : [what should I put here? (Mste)]
AuthUserID : 9_digital_CWU_acc#
AuthPassword : CWU_password

Thanks for any help.
Logged
RonR
Hero Member
*****
Posts: 4527


« Reply #1 on: June 25, 2011, 11:49:27 pm »

You pretty much have it.

Voice Gateway3:

Name : CallWithUs
AccessNumber : SP1(sip.callwithus.com)
DigitMap : (Mste)
AuthUserID : 9_digit_CWU_acc#
AuthPassword : CWU_password

You might also find this thread helpful:

http://www.obitalk.com/forum/index.php?topic=1063.0
« Last Edit: June 25, 2011, 11:51:30 pm by RonR » Logged
scanchain
Newbie
*
Posts: 3


« Reply #2 on: June 26, 2011, 04:00:27 pm »

Thanks RonR. The link you referenced helped a lot.
Logged
scanchain
Newbie
*
Posts: 3


« Reply #3 on: June 27, 2011, 02:06:53 pm »

RonR,

In the digitMap you wrote, you have

[^*]@@.'@'@@.

Could you explain what does '@' do? I don't seem to find this described in the manual.

The original fragment was

[^*]@@.

Thank you!
« Last Edit: June 27, 2011, 02:13:24 pm by scanchain » Logged
RonR
Hero Member
*****
Posts: 4527


« Reply #4 on: June 27, 2011, 02:51:56 pm »

An @ character in a DigitMap matches any alphanumeric character except #.  Putting single quotes around it matches the @ character itself.

The original rule [^*]@@. matches anything that does not start with an *.  This rule is in support of SIP URI's (18005551212@tf.callwithus.com).  The original rule matches way too much in my opinion which is why I use [^*]@@.'@'@@. (anything@anything that doesn't start with an *).

Now that I look at it again, it only needs to be : @@.'@'@@.

The original rule required the [^*] portion to keep it from breaking Star Codes.  Using @@.'@'@@. only does not interfere with Star Codes and only matches SIP URI's.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC