how do you register obi1062 with elastix/freepbx?

(1/1)

lageotakes:
I am trying to get my obi1062 to work with my elastix pbx.  I had it working with my piaf pbx but I am unable to register it with elastix.

I created an extension 777 in elastix and created a password xxxx

I made the following changes in my obi1062.

itsp profile c sip
ProxyServer 192.168.1.2  (ip of exlastix)
ProxyServerPort 5060
RegistrarServerPort 5060
OutboundProxyPort 5060

voice service sp 3
AuthUserName 777
AuthPassword xxxx
X_KeepAliveServerPort 5060
X_UserAgentPort 5062 (should this be 5062?  I also tried 5060)

I can reachthe pbxz with yate sip client in computer.  As stated before this was working with my piaf pbx.

Any ideas?

lageotakes:
I also want to mention that the status page of the obi1062 has the following error

SP3 Service Status
Register Failed: No Response From Server (server=192.168.1.2:5061; retrying)   

I don't see where the port number5061 is listed in the obi1062. I only saw ports 5060 and 5062 is listed above.

I tried changing the port to 5061 of the elastix extension page, but that did not work either.  where do you change the port number in the obi1062.

lageotakes:
Never mind figured it out.  I had the obitalk settings box checked.  I thought this would pick up the value that was in the box which was port number 5060 .  Apparently it does not.  I remove the check from the obitalk settings and typed 5060 in the proxy server port.

Navigation

[0] Message Index