Multiple OBi 100s In Use With Key System/PBX

<< < (2/2)

Steve56:
I find it curious that call forwarding on busy works with your Obi ATAs but not mine. Just to confirm my suspicions, I reconfigured the call forwarding settings accordingly, and sure enough the person calling into my GV number hear ringing, but Line 2 (the second Obi) doesn't ring. Perhaps the firmware in use on the Obi110 and Obi100 differs in that regard?

I made numerous attempts to configure call forward on busy using star codes and the expert configuration, all with no success. The first Obi100 is running software version 1.3.0 (Build: 2872).

azrobert:
The OBi110 uses the same firmware as the OBi100. I tested differently, but it shouldn't matter. I have an OBi200, an OBi110 and a landline. I made the OBi110 busy by calling it from the OBi200, using GV on both devices. I then called the OBi110 from the landline. I forwarded the call to a PC softphone registered to Raspbx.

Did you disable call waiting? How did you make the OBi100 busy? I believe you can't just take the phone off hook, you must have the OBi100 on an active call.

Navigation

[0] Message Index

[*] Previous page