caller id number

<< < (2/2)

azrobert:
Quote from: Scott2 on March 03, 2016, 08:31:37 am

What is this field used for?

The Phone Port DigitMap is used to validate the dialed number. (Mpli) in the Phone DigitMap will include the Primary Route's (Default is SP1) DigitMap rules. You can modify the dialed number. It also determines how long the OBi will wait until the call is routed.

Then the Phone Port OuboundCallRoute will route the call to the correct SP trunk. Rule {(Mpli):pli} will compare the dialed number with the rules in the Primary Route's DigitMap and upon a match will route the call to the Primary route.

The default X_InboundCallRoute will route inbound calls to the Phone Port. The inbound route can be changed to block calls, re-route calls to an IP address or out a trunk to another phone number or modify the callerid.

Scott2:
I made the change and it works.   Thanks for help.

Navigation

[0] Message Index

[*] Previous page