can obi allow paging to other handsets
SteveInWA:
Quote from: Ansextra on March 08, 2016, 09:39:43 am
I have an Obi 202 with a Dect single line phone in each port as well as two GV numbers configured. When I press the # key on one phone it rings the other phone.
See my reply above. Since the OP hasn't replied to clarify, I assume that the phones are all connected to only one of the 202's two physical phone ports. In this configuration, no, you can't use the OBi's "press # to ring the other phone line feature, since all the phones are on the same line.
dircom:
The original post is ambiguous.
Quote from: dddd on March 03, 2016, 05:40:29 pm
i have a very basic setup. obi202 connected to phone port. a bunch of different telephones connected around the house.
can i pick one up and have obi ring the others?
You do not connect an obi202 to "phone port" (the obi has phone jacks, that support up to two separate phone systems)
All we know for sure is dddd has several phones connected, we don't know if they go to a single phone jack or to both phone jacks on the Obi
SteveInWA says ".... I assume ......"
Without making any assumptions, one can accurately say, you can not page individual phones with an Obi,
but if you have an Obi 202, and a phone(s) or phone systems connected to each phone jack on the Obi, you CAN call from one phone line to the other by lifting the handset and pressing the # button
Navigation
[0] Message Index
[*] Previous page