Would really appreciate help
drgeoff:
OBis give dial tone even with nothing connected to the ethernet jack. If your's is not giving dial tone check the phone and the phone cord. If one of those is not the problem, the OBi or its PSU is.
Cory:
So I tried again to get the obi to work. Now I think the reset button is broke and I'll have to get another one. The light blinks red/green and no dial tone. I cannot feel a reset button when I press with a paper clip in the reset hole like I used to. I'm now looking at getting another one. Do I need to port my old number to the new one or will I (hopefully) just be able to plug it in add it to the obi talk? Also, I know I might get flack for this but instead of reading over a hundred pages in here, can someone suggest an obi model to go to or just stick with the one I have (obi 100)? Thanks
SteveInWA:
It's Hammer Time!
Figure #1, not Figure #2.
Buy an OBi 200. Better, newer-design hardware, more features, and more reliable.
Cory:
Haha. Thanks. Do I need to port my old number to the new obi?
SteveInWA:
OK, now you are going to get the lazy dope slap.
Delete the OBi 100 from your OBiTALK dashboard. Buy an OBi 200. Add the OBi 200 to your OBiTALK dashboard. Configure your desired Google Voice and/or SIP accounts on the new OBi. There is no "porting" involved.
Navigation
[0] Message Index
[#] Next page
[*] Previous page