Single-Stage Dialing Through Any OBi Trunk
RonR:
Quote from: lhm. on January 06, 2012, 12:55:53 pm
Digit Map is (Msp1)
What is the SP1 DigitMap?
lhm.:
ISTP Profile A is
(<**3>011xx.|<911:6158628600>|<411:8005000000>|1xxxxxxxxxx|<1615>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|<**20118835100>xxxxxxxx|[*#0-9][*#0-9]x.|[x*][x*].|(Mipd)|[^*]@@.)
RonR:
**318005551212 matches the {(Mcot)>(Mtg1):tg1} rule in the OBiTALK InboundCallRoute due to the |[x*][x*].| rule in SP1. Consequently, the call goes out TG1.
lhm.:
Should I remove that part to make it work? If so, what do you recommend for my digit map? If anything.
Update: Removed |[x*][x*].| and still the same. Goes out to SP1
RonR:
Quote from: lhm. on January 06, 2012, 01:22:06 pm
Should I remove that part to make it work? If so, what do you recommend for my digit map?
You have a lot of rules throughout your configuration that aren't readily apparent to me what their purpose is, so I'm not in a good position to advise.
I think you're in much deeper trouble than you might suspect as you've elected to change some of the normal service route access codes from **n to *n. The single-stage dialing configuration I posted relies on OBi-to-OBi dialing losing one of *'s in process, such that dialing **2 arrives as *2 in the receiving OBi's OBiTALK InboundCallRoute. This will be indistinguishable from your dialing *2+number from an OBiON App.
Navigation
[0] Message Index
[#] Next page
[*] Previous page