Single-Stage Dialing Through Any OBi Trunk
lhm.:
So what do I dial from ObiOn App? **3 or *3 ?
RonR:
An OBiON App doesn't alter what's dialed.
lhm.:
My setup is now modified from the default settings per the instructions. Do you see any problems?
SP1 Digitmap:(<**2>011xx.|<911:6158628600>|<411:8005000000>|1xxxxxxxxxx|<1615>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|<**20118835100>xxxxxxxx|[*#0-9][*#0-9]x.|(Mipd)|[^*]@@.)
ObiTalk
{(Mcot)>(Mtg1):tg1},{(Mcot)>(<*1:>(Msp1)):sp1},{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*3:>(Mvg1)):vg1},{(Mcot)>(<*8:>(Mli)):li}, {(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},{(Mcot)>(<**3:>(Mvg1)):vg1},{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}
AA DigitMap ([1-9]x?*@@.|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
AA OutboundCallRoute {([1-9]x?*@@.):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Phone Port
DigitMap ([1-9]x?*@@.|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
OutboundCallRoute {([1-9]x?*@@.):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Update: Solved. It was this [*#0-9][*#0-9]x.| that was also causing the problem of going to SP1.
Thanks, RonR for leading me to the solution.
anythingindian:
I've been trying to mess around with this and get this to work, and have been very unsuccessful. Is there anyone around that could help me to set this up. Even from my main account obiapp it won't let me do single stage calls through my sp1, sp2, or sp4 trunks, only right through with my default sp3 trunk. I'm willing to pay for time as I've just not been able to get this done and have wasted a lot of time trying to trouble shoot. I really wish that Obi would do as mentioned before and they probably would see a lot of improvement in sales and usability. I wouldn't recommend this product to anyone that would want something plug and play, and easy setup that is somewhat a novice.
Quote from: QBZappy on July 30, 2011, 11:01:50 pm
Quote from: facaletz on July 30, 2011, 03:17:31 pm
Hi there,It is nice,it is beautiful BUT depends how many Obis You want to sell,if the Obi meant to be for dummy end users like me ,i mean 99.999% of the population,Youl'll better consider putting all that stuff in the box,and leave us a few places where to put just REAL Phone or obi numbers and VOALA no headache!!
G'd Day from Down Under!
Straight to the point. There is a strong message here.
jimates:
Since I don't have this configuration on any of my Obi's, I just set this up on one of my Obi110's to make sure everything works.
I had problems getting it to work and found out what my problem was.
I copied the Obitalk Service InboundCallRoute and made the needed changes. I then copied the new route to the Obi's field. After messing with it for a few minutes I found that the whole call route did not paste in the field.
For some reason only the first line would paste in the field.
although I could copy and paste the full route from the post to my computer, it would only paste the first line of the route every time. I tried to copy and paste from both my computer and from the forum, both gave the same results.
I had to copy and paste one line at a time to get it all in the field.
Now it is working like it is supposed to.
Navigation
[0] Message Index
[#] Next page
[*] Previous page