PrimaryLine setting trumps 7 digit dialing code setting

<< < (2/2)

ianobi:
I have been trying to reproduce this problem using an OBi1032. My experience has been slightly different.

Quote

If you go off-hook by lifting the handset, the prepended area code latches to the area code associated with whichever SPx has been set as the default, e.g. if SP1 is area code "505", 505 will be latched as the prepend. Then, with handset in your hand off-hook, if you push another line button to select a different SP, say SP2 that has area code 925, unexpectedly the latched value 505 prepends.

I find that this behaviour is the same if you lift the handset first or push the speaker phone button first.

All works correctly if you press the relevant Line Button first which acts as a speaker phone button, even if you then lift the handset before dialling the digits.

Maybe the OBi1032 behaves differently to the OBi1062 - we will await the next software update to see what changes are made!

kcolsen:
OBi Support pushed a fix to my 1062. It works.

No word yet on when/if it will be officially released.

Navigation

[0] Message Index

[*] Previous page