Incoming Calls help needed OBI 200
lucas10:
Hi,
obi 200 + voip by freephoneline need some help.
OBI SoftwareVersion 3.1.0 (Build: 5191), hardware version is 1.4. For now using only SP1 Service from freephoneline voip.
I want my home phone to ring for every call: a regular call or anonymous call, so all incoming calls to be treated equally. Now anonymous calls going directly to voice mail without ringing on my phone. I also have DND feature off and Anonymous Call Block is off. Freephoneline voip checked from their side and its definitely OBI configuration, since other ATA having no issues with anonymous calls not ringing and sent to voice mail. Here are my current Digit Map setups:
ITSP Profile A General DigitMap ('*98'|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
Voice Service SP1 Service X_InboundCallRoute ph
User Settings User Defined DigitMaps
Label ipd
DigitMap (xx.<*:@>xx?x?<*:.>xx?x?<*:.>xx?x?<*:.>xx?x?|xx.<*:@>xx?x?<*:.>xx?x?<*:.>xx?x?<*:.>xx?x?<*::>xx?x?x?x?)
I tried to modify User Settings ipd DigitMap by removing all ?: bit did not work !
Would appreciate some coding help here.
Thanks !
drgeoff:
Only the InboundCallRoute determines what happens to inbound calls. Yours is set to 'ph' so all incoming calls will go to the phone. Whatever is making anonymous calls go to voicemail is not your Obi, despite what FPL have told you.
lucas10:
Quote from: drgeoff on March 30, 2016, 05:12:37 pm
Only the InboundCallRoute determines what happens to inbound calls. Yours is set to 'ph' so all incoming calls will go to the phone. Whatever is making anonymous calls go to voicemail is not your Obi, despite what FPL have told you.
hi drgeoff
I am lost now with this issue.
Here is what FPL are saying:
"Re: "anonymous" call rejected
Postby Fongo Support » 03/11/2016
Hi,
We are not rejecting anonymous calls.
I just tested now by calling from a Bell landline and block my caller ID to my FPL number an it worked.
regards"
Is not User Defined DigitMap has something to do with it? Seems like a simple issue, and it seems to start after
latest update i made to OBI firmware couple of weeks ago...
If some modification in DigitMap would still go around to help resolve it, would be greatly appreciated.
Btw I seen several other OBI+FPL users having similar problem, but not any other ATA+FPL, so why is that?
Thanks
lucas10:
here is how another user of OBI+FPL went around this issue:
"
Re: "anonymous" call rejected
Postby Mallox » 03/12/2016
To whom it can help
What did the trick for me (at least for what I can tell so far...)
Is to force to disable all un-use service in the OBI.
First directly in the OBI config itself and then by online by unchecking the obitalk and default device AND then unchecking the enable box
so I disabled the everything I wasn't using ... the AA, Gateway, trunk, OBItak, OBiPLUS, OBiBlue ...
after I did a manual restart... and than it was working out of no where...
I can't explain why... but I'm just happy it's finally working after all the time I past trying to make it work and everything I try.
Just hope it can help someone else... and that it will stay like that! "
So now I am even more confused, but must be a better way to solve this issue since it does not look right to
disable many services as posted by Mallox above.
Thanks for any help !!!
ProfTech:
I'm not sure how FPL works but you may want to make sure that X_AcceptSipFromRegistrarOnly is NOT checked. If it is, your Obi could refuse the call. CallCentric works that way. Not exactly the same result but worth trying. Also EnforceRequestUserID could act similar. Just a couple of thoughts.javascript:void(0);
Navigation
[0] Message Index
[#] Next page