Caller ID Belgacom in Belgium

(1/2) > >>

DjSam:
Hi everyone,

I'm trying to setup an Obi110 with a Belgacom POTS plugged in the line port

I'm having problems with Caller ID settings. I tried plugging in a normal deskphone and it worked but I cannot get Obi to get CID.

It's not the first Obi I install. I have 3 connected to an asterisk server so far and they all are working great

Any help?

drgeoff:
Have you changed the OBi to expect ETSI standard Caller ID?  Physical Interfaces, Line Port, Port Settings, CallerIDDetectMethod.  Try FSK(V.23).  If that does not work try the two DTMF options.

DjSam:
Tried all 4 with no use

drgeoff:
http://www.ainslie.org.uk/callerid/cli_faq.htm says Belgium is a country using an "esoteric DTMF system" but the text there suggests commonality with the two DTMF methods which the OBi110 claims to support.  Unfortunately the links are dead.

DjSam:
Using FSK (V.23) I kind of got it to work
The caller ID is showing in the Phone & Line Status page, preceded by a "
It doesn't show up in Call Status while ringing nor in the Call History
How can I get Obi to remove the " from the caller ID?

Navigation

[0] Message Index

[#] Next page