OBI100 says need firmware update to use GV, but already using latest version
naseem:
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Thanks very much for the detailed instructions and was able to add OBI 110 back.
SteveInWA:
Quote from: naseem on November 20, 2017, 05:06:23 pm
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Thanks very much for the detailed instructions and was able to add OBI 110 back.
NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO. NO.
That is an old post that is no longer correct, as it referred to a different problem.
Read:
http://www.obitalk.com/forum/index.php?topic=13113.msg84139#msg84139
http://www.obitalk.com/forum/index.php?topic=13147.0
Navigation
[0] Message Index
[*] Previous page