OBI100 says need firmware update to use GV, but already using latest version
Supermailman:
You have to upload the firewire version to 2886. :)
If you don't upload this new version, even you reset the device to factory setting nothing help.
StrikeEagleIII:
Quote from: Taoman on May 18, 2016, 05:29:15 pm
Download the following new firmware version and install manually:
http://fw.obihai.com/OBi110-1-3-0-2886.fw
Please report back if that fixed the problem.
Like others our OBI 100 has been working fine for ages and then 2 days ago it all of a sudden wanted my wife and I both to re-sign in to renew our Google Voice credentials. That seemed to work for a little bit, but then things quit again--after logging into Obitalk (again) we started getting the ransom ad to get the new firmware. The "latest" firmware here did NOT work but v. 1-3-0-2886 from the link you provide was golden. THANKS!!!
SteveInWA:
This has been thoroughly discussed and answered, here:
https://www.obitalk.com/forum/index.php?topic=11252.msg73904#msg73904
SteveInWA:
The ***6 procedure will not always offer the very latest firmware.
The solution has already been posted here: https://www.obitalk.com/forum/index.php?topic=11252.msg73904#msg73904
DShah:
I was in the same boat but the below procedure by @yorktown saved the day and it's working fine now!
Thanks to all!
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Navigation
[0] Message Index
[#] Next page
[*] Previous page