OBI100 says need firmware update to use GV, but already using latest version
SteveInWA:
Quote from: GamerGabe on June 14, 2016, 01:30:45 am
Quote from: EnricoPallazzo on May 18, 2016, 03:07:34 pm
For the past 2 years, everything has worked fine, but 2 days ago, my service stopped working. I was able to re-authenticate GV in the ObiTalk dash to get it working, but today, when it happened again, I was not able to re-authenticate.
I currently have 1.3.0.2872 installed (the latest firmware version), but I am still receiving the message that I need to update the firmware in order for my Google Voice account to work. I've tried a factory reset and changing GV logins, but no dice. I would like to try downgrading the firmware (a solution that has worked for OBI 2xxx), but I cannot find the firmware for previous versions (e.g. 1.3.0.2824).
Anyone run into this issue or have a link to the previous firmware versions for OBI100?
Last week, I unplugged the telephone line only to prevent calls. Today, it occurred to me to switch to cat6 cabling since I just configured a Vrzn router to work on Comcast and have VoIP priority. As soon as I have done this, a new connection attempt was made with Obi network and now it won't work and I got the same support upgrade message ($10). Considering how long it's lasted, I'm pretty well off either way. But back when Google gave out, I was duped into buying another Obi, just so I could use it with RingTo's free service. Well, that was a joke, and then Google got back on board after all, and now I see that RingTo is ready to give up my number (guaranteed forever, especially since I bought the Obi just to get the new number). Anyway, I'm sure I'll get this fixed easily enough. My firmware only says 1.3.0
Dude: this has already been answered over and over, in this very thread, as well as at least 3 other threads.
Download and save the .fw file from this link: http://fw.obihai.com/OBi110-1-3-0-2886.fwPick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.Open a web browser to that address.Log into your OBi device. The default username and password are both adminClick System Management-->Device Update-->Firmware Update-->Select file to update firmware.Browse to the file you downloaded and select it.Click the "Update" button.
hookup1975:
::) Um I have an old Obi100 from way back in the day, Today I heard some echo and then my call droped and my Obi service was gone just like that, after 3 hours looking at posts I got it fixed and I did not have to pay 10.00 dollars, Just update it with latest firmware for the obi110 I just did it and it works like a charm and my service is better than ever.
To update your phone make sure it is connected to your network and dial ***1, this girl will tell you your IP address in witch the phone is on. Take that number and pop it in your browser with NO www. just the number. It will ask you for user name and password, Both are Admin. Once inside goto system and you will see the update firmware area, then just tell it where to go.
SteveInWA:
Quote from: hookup1975 on June 14, 2016, 04:14:17 am
::) Um I have an old Obi100 from way back in the day, Today I heard some echo and then my call droped and my Obi service was gone just like that, after 3 hours looking at posts I got it fixed and I did not have to pay 10.00 dollars, Just update it with latest firmware for the obi110 I just did it and it works like a charm and my service is better than ever.
To update your phone make sure it is connected to your network and dial ***1, this girl will tell you your IP address in witch the phone is on. Take that number and pop it in your browser with NO www. just the number. It will ask you for user name and password, Both are Admin. Once inside goto system and you will see the update firmware area, then just tell it where to go.
This explains your issue: https://youtu.be/apycc74x-EQ
lilmisscrystal81:
>:(
the admin admin doesn't work for me. I can't get past putting in my IP address and then putting in admin admin... any idea why this isn't working for me?
SteveInWA:
Quote from: lilmisscrystal81 on June 14, 2016, 06:26:35 pm
>:(
the admin admin doesn't work for me. I can't get past putting in my IP address and then putting in admin admin... any idea why this isn't working for me?
Perhaps you changed the password at some point. You can factory-reset the OBi to revert back to the default admin password. Pick up the phone attached to the OBi and key in ***8, then 1 to reset to factory defaults, and wait for it to reboot.
Navigation
[0] Message Index
[#] Next page
[*] Previous page