OBI100 says need firmware update to use GV, but already using latest version
Taoman:
Quote from: lilmisscrystal81 on June 14, 2016, 06:26:35 pm
>:(
the admin admin doesn't work for me. I can't get past putting in my IP address and then putting in admin admin... any idea why this isn't working for me?
Did you change your password at some point? Go to the Obitalk web portal and click on the "gear" icon for your device. What does Webpage Admin Password say? Is that the password you are trying?
Seattleweather:
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Thank you. It fixed my 110 problem, for now.
tazmo8448:
@Seattleweather thanks man that worked like a charm! ;D
Taps_ATL:
I just did this, and it works. Thanks!
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Torovolt:
@yorktown procedure of firmware upgraded worked for me.
Thanks ! :D
Navigation
[0] Message Index
[#] Next page
[*] Previous page