OBI100 says need firmware update to use GV, but already using latest version
TheDreamer:
Quote from: Wuwu on June 23, 2016, 05:33:54 pm
I have always kept my OBI devices up-to-date. This recent maneuver by OBI is hogwash.
Is it possible to update the firmware manually via expert config and/or remotely while NOT on the same network the OBI is plugged in to?
Apparently, yes... courtesy of drgeoff
https://www.obitalk.com/forum/index.php?topic=11372.msg74826#msg74826
SteveInWA:
Quote from: Wuwu on June 23, 2016, 05:33:54 pm
I have always kept my OBI devices up-to-date. This recent maneuver by OBI is hogwash.
Is it possible to update the firmware manually via expert config and/or remotely while NOT on the same network the OBI is plugged in to?
Now that you have gotten rid of the very old firmware build, yes. Read drgeoff's instructions:
http://www.obitalk.com/forum/index.php?topic=11372.msg74826#msg74826
Jfriedlund:
Yorktown - THANK YOU for taking the time to post step by step instructions on how to do the firmware update. I tried dialing into the system and all I would get is a recording saying "firmware update unavailable". Your system worked perfectly and I'm back in business. Thanks again!
triplevvv:
Thanks for this, this solved my problem. I haven't logged in to my account until I found out that my device is not working. So here are some question regarding this firmware?
1) what is this firmware, do you have the release note? I think I set my device to auto upgrade before, now I am out of warranty, and in my device setting there is no auto upgrade anymore, would they still auto upgrade it?
2) Can I disable the autoupgrade? Or they want everyone to subscribe the warranty? in order to make the device work in the near future?
3) Can I downgrade to the 2014 firmware?
Thanks for the help.
Quote from: Seattleweather on June 14, 2016, 08:05:39 pm
Quote from: yorktown on May 18, 2016, 09:37:23 pm
Found the solution on another thread for the Obi100.
Download this firmware for the Obi110 http://fw.obihai.com/OBi110-1-3-0-2886.fw
(Yes, I know its for the Obi110 but it will work in the Obi100).
Then Reboot.
If you don't know how to install the firmware:
Dial * * * 1
It will give you the IP Address: 192.168.XXX.XXX (example 192.168.1.27 )
In your browser, enter the IP Address as the URL.
User Name: admin
password: admin
On the left side, navigate to SYSTEM MANAGEMENT
Click DEVICE UPDATE
At the top where it says "Firmware Update
Select file to update firmware [BROWSE] ...."
Click BROWSE and add the file. Then click UPLOAD
Once it reboots its done.
In the obitalk portal, you can delete the old device and add a new device. Its should work with Google Voice using OAuth.
Thank you. It fixed my 110 problem, for now.
SteveInWA:
Just read my instructions here, and perform the procedure. That's all you need to do:
http://www.obitalk.com/forum/index.php?topic=11384.0
There are no release notes.
Navigation
[0] Message Index
[#] Next page
[*] Previous page