I have a OBi110 that had 1.3.0 (Build: 2872) on it that stopped working.
NOTE: I did not have to delete my existing information in
obitalk.com or manually press the reset button on the device.
These are the steps that resolved my problem.
NOTE: At this time (at least for me), there is no need to follow the instructions referred to in the link towards the beginning of this thread:
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460I successfully manually installed the 1.3.0 (Build: 2886) update.
(This is not a necessary step) Went to make a call and the call didn't go through, but it told me to login into OBiTALK and update my password.
I logged into
obitalk.com and immediately a screen came up mentioning that my Google Voice information needed to be updated, I selected OK.
I believe I got a screen that I had to select 'Accept' regarding Emergency Service Calls (911).
It took me to the 'Device Configuration' screen
Even thought the 'Active Google Username' listed was correct, I had to select the hyperlink:
'Click Here to replace the active Google Account'.
It brought up a 'Google (Request for Permission)' screen in a separate little browser window, I selected 'Allow'.
Next a 'Google Voice Account Confirmation (OBiTALK: Google Voice Account Confirmation)' with my Google Voice E-mail address, I selected 'Confirm', it came back to the 'Configuration Name' screen, I selected 'Save', after that my device restarted and Connected. It's now working.
If this helps you, Just Thank the Lord!