OBI100 No Service Available Message - Fixed
FreeGV4all:
Quote from: GeorgeObi on June 14, 2016, 11:58:16 am
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Thank you SO much. You just saved me $10! :) I'm going to pay it forward.
highpks:
Quote from: GeorgeObi on June 14, 2016, 11:58:16 am
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Thank you! Had the same issue and followed these instructions and now all is well. Did not have to reconfigure anything.
Cowboymick:
Quote from: GeorgeObi on June 14, 2016, 11:58:16 am
update the firmware manually to fix this.
http://fw.obihai.com/OBi110-1-3-0-2886.fw (for Obi 100 and 110)
Pick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.
Open a web browser to that address.
Click System Management-->Device Update-->Firmware Update-->Select file to update firmware.
Browse to the file you downloaded and select it.
Click the "Update" button.
Same issue here. Thanks for the info, it got us up and running in no time. We really appreciate it!!
nicmart:
admin is the default user name and password for local web access
[/quote]
No idea what this means. Trying to log in with the user name a pw I use for the Obi web site doesn't work.
drgeoff:
Quote from: nicmart on June 23, 2016, 05:56:01 am
admin is the default user name and password for local web access
No idea what this means. Trying to log in with the user name a pw I use for the Obi web site doesn't work.
[/quote]
It means that when you point a browser at the OBi's IP address on the LAN and are asked for username and password, they are both 'admin' (without the quotes) if they have not been changed from the default values. Your credentials for the Obitalk Dashboard and forum are not what are being asked for.
Navigation
[0] Message Index
[#] Next page
[*] Previous page