No PSTN echo (SP1, SP2 echo OK)

(1/3) > >>

Nearsighted:
**9222-222-2222 echo test works.
**2909-390-0003 echo test works.
**1909-390-0003 echo test worked (till I added GV pins... another story).
1909-390-0003 echo test answers, but does not echo.

Any help is appreciated.

RonR:
Do all PSTN calls have one-way or no-way audio?

What happens if you dial #, wait for dialtone, followed by the echo test number?

What happens if you remove power from the OBi and dial the echo test number?

Nearsighted:
OBI-Attached Phone (obi-1) to Cell
First word could be heard on both. After that:
+ can hear obi-1 voice at cell
+ cannot hear cell voice at obi-1

Dialing Test Number
#-dial tone: 1-909-390-0003 no ring, dead air
Disconnect OBI
dial tone:  1-909-390-0003 no ring, dead air

Dial Cell After Disconnect OBI
+ works normally

RonR:
Have you tried a different telephone connected to the OBi?

With no power applied to the OBi, the OBi's PHONE Port and LINE Port are connected directly together via a fail-safe relay and should be the same as plugging the telephone directly into the PSTN line with no OBi in the picture.

Nearsighted:
POTS-to-Line (100% OBI bypass)
dial tone:  1-909-390-0003 no ring, dead air

POTS-to-Cell
works normally

POTS-to-POTS
works normally

Navigation

[0] Message Index

[#] Next page