GV Backing off? OBI NOT WORKING DO NOT PAY $10 Manully Upgrade FW

(1/3) > >>

hapollo:
It seems today is full of posts about GV backing off and $10 ransomware is being paid to get GV working again.

As much as I love my Obi and thank OBi for their solution, I have an issue with them doing something on their end leading people to pay the $10 needlessly.

The solution:

Manually upgrade your firmware to 2886 and the $10 pop up with disappear from your Obitalk Portal.

https://www.obitalk.com/forum/index.php?topic=11256.msg73954#msg73954

firmware 2886 is for OBI1xx if you have a Obi2xx use this 5264 firmware instead

https://www.obitalk.com/forum/index.php?topic=9983.msg73804#msg73804

SteveInWA:
Stop the spam.  This question has already been answered over and over and over again.

Download and save the .fw file from this link:  http://fw.obihai.com/OBi110-1-3-0-2886.fwPick up the phone attached to your OBi and dial ***1 and write down the IP address that it reads to you.Open a web browser to that address.Log into your OBi device.  The default username and password are both adminClick System Management-->Device Update-->Firmware Update-->Select file to update firmware.Browse to the file you downloaded and select it.Click the "Update" button.

hapollo:
Apologies if I annoyed you but while it has been addressed individually within threads, I though it would be helpful to post in 3 sub forums since the question about backing of keeps arise in different subject headings.

OBI100 Stopped Working after Firmware Upgrade

Obi100's disabled until you shell out $10!

Error: no service configured

So, IMHO Backing off and $10 seems to be more pertinent and eye catching as the Subject header.

notconfident:
I have been working on this for hours today. My Obi 100 stopped working. I have updated the software and rebooted many times. It is still not configured for Google Voice, and any attempts to add Google as a voice provider in the other SP just takes me in circles trying to squeeze $10 out of me! I can't figure out how to get it working again.  ???

Taoman:
Quote from: notconfident on June 14, 2016, 05:48:47 pm

I have been working on this for hours today. My Obi 100 stopped working. I have updated the software and rebooted many times. It is still not configured for Google Voice, and any attempts to add Google as a voice provider in the other SP just takes me in circles trying to squeeze $10 out of me! I can't figure out how to get it working again.  ???


Doesn't sound like your device was actually updated. Have you gone in to the System Status page and looked at what the SoftwareVersion actually says? Does it actually say:

1.3.0 (Build: 2886)

Navigation

[0] Message Index

[#] Next page