Ring Tone

(1/4) > >>

npr1:
When making outgoing calls through my Obi110 over the land line (PSTN) I hear the correct UK ring tone.

When making outgoing calls through the Obi110 over SIP I hear a different ring tone.

I assume the ring tone is generated by the VOIP provider, in this case a Betamax reseller based somewhere in Europe. Is there any way I can get the Obi to intercept the ring tone and generate a UK tone.

azrobert:
Use OBi Expert to change the Ringback Tone

Tone Settings -> Tone Profile A
Under Ringback Tone
TonePattern: 400-18,450-18;-1;(.4+.2,.4+2)

I left the strength of the tone at -18 dBm. I don't know if that is correct.

See Tone & Ring patterns in the Admin Guide:
http://www.obihai.com/docs/OBiDeviceAdminGuide.pdf

npr1:
Thanks, that's the setting I use but with -20dB.

From all my research trying to find a answer, that setting appears to set the ring tone some one would hear who phoned me. I can't find anywhere in the Obi a setting for the ring tone I hear, you would think there would be a way with such a configurable device -- am I missing something?

ianobi:
As always with SIP, this is a bigger subject than it first appears! Have a read of this:

http://www.obitalk.com/forum/index.php?topic=10233.0


The ring tone described by azrobert is not sent back to the callee, it is sent to the OBi110 Phone Port to tell you the callee is being rung if early media is not being used.

SteveInWA:
Quote from: ianobi on June 22, 2016, 01:51:20 am

As always with SIP, this is a bigger subject than it first appears! Have a read of this:

http://www.obitalk.com/forum/index.php?topic=10233.0


The ring tone described by azrobert is not sent back to the callee, it is sent to the OBi110 Phone Port to tell you the callee is being rung if early media is not being used.


Actually, one could just jump to your excellent write-up here, and skip the rest:

http://www.obitalk.com/forum/index.php?topic=10233.msg67758#msg67758

Navigation

[0] Message Index

[#] Next page