Tutorial: Setup with Google Voice and Callcentric for Caller Id Name and e911
drgeoff:
Quote from: Mrkeja on February 17, 2018, 08:20:01 pm
Thanks for this tutorial. I did all 8 steps and it works. I did notice my incoming call ring is a double ring instead of ring profile type 1(single ring). I went into the expert settings and made sure the ring type is 1 for both sp1(GV), and sp2(call centric). Is there a way to get all my incoming calls on obi200 to ring single ring type 1 again?
Check that the RingProfile is set to A.
Mrkeja:
Yes that fixed it!
The SP2 ring profile was set default to B.
I set it to A and now it's back to the normal ring!
Thanks so much!
GaryYang:
These are really helpful posts, especially the tutorial from Dwestall. I was able to follow it and set up Callcentric E911 service with my ObiTalk 200. My SP1 is GV. Now when I call 933 to verify the service, the voice echoes my address correctly. But it tells me that I called from 1-631-909-****. I don't recognize this number. It's neither my GV number, nor CC number. However, when I call this number from another phone, the phone connected to ObiTalk rings. I expect it tells me that I called from my GV number.
Do any one know what this 1-631-909-**** number is? Is this expected or have I missed any setting?
Thank you in advance.
drgeoff:
Quote from: GaryYang on March 06, 2018, 10:05:42 am
These are really helpful posts, especially the tutorial from Dwestall. I was able to follow it and set up Callcentric E911 service with my ObiTalk 200. My SP1 is GV. Now when I call 933 to verify the service, the voice echoes my address correctly. But it tells me that I called from 1-631-909-****. I don't recognize this number. It's neither my GV number, nor CC number. However, when I call this number from another phone, the phone connected to ObiTalk rings. I expect it tells me that I called from my GV number.
Do any one know what this 1-631-909-**** number is? Is this expected or have I missed any setting?
Thank you in advance.
Read the question by LAZARUS and the answer with explanation by SteveInWA. https://www.obitalk.com/forum/index.php?topic=5109.msg84944#msg84944
GaryYang:
Thanks a lot drgeoff!!! I answered my question. I responded with a follow-up question as shown here:
"I am using Callcentric's E911 + GV. I noticed that the number read out by 933 test is not always reachable. It's only reachable for a while after I call 933. Do you know how long it remains reachable after 911 call? This is important too."
Do you know the duration that the call back number remains available?
Navigation
[0] Message Index
[#] Next page
[*] Previous page