I found that the Trunk Group feature seems not working in my OBI 200.
In the Physical Interfaces -> Phone -> OutboundCallRoute, I have the following piece in the rule:
{(<:1416>xxxxxxx):TG1}
In the Voice Service -> Gateways & TrunkGrps -> Trunk Group1, I set up the following:
Enable = ( Checked )
Name = TG1
TrunkList = SP3,SP4
DigitMap = (XX.S5S5)
If I dial a number that matches the (<:1416>xxxxxxx) digit map, say 1234567, I got an error saying: No service configured error.
However, in the OutboundCallRoute, if I change the piece to be:
{(<:1416>xxxxxxx):SP3}, essentially change TG1 to SP3, then I can dial out successfully.
Can someone help me on this issue? Thanks a lot!