The Trunk Group feature seems not working in OBI 200

<< < (2/2)

azrobert:
There is a very easy fix to the example I gave you that will address your concern. The SP3 and SP4 DigitMaps must match an 11 digit number, so you can use rule "x." instead of "1416xxxxxxx".

Here is my suggestion:
Enable = ( Checked )
Name = (default of blank)
TrunkList = SP3,SP4
DigitMap = ()
ITSP C DigitMap = (x.)
ITSP D DigitMap = (x.) or ITSP D DigitMap = (Msp3)

The reason OBiHai requires all DigitMaps to be defined is that they can be different. Here is an example SP1 for domestic, SP2 for international and backup for SP1.
See: http://www.obitalk.com/forum/index.php?topic=11329.msg74501#msg74501

Trunk Groups are a very powerful tool. You can reduce the Phone outbound route to a single rule on a configuration with several service providers.
See: http://www.obitalk.com/forum/index.php?topic=8208.0

TTCP:
Thanks azrobert!

Your fix works wonderfully!

Navigation

[0] Message Index

[*] Previous page